---
title: "How to Connect a Company to Toolradar"
canonical: "https://toolradar.com/vendors/guides/connect-company-to-toolradar"
---

# How to Connect a Company to Toolradar

By [Toolradar Editorial Team](https://toolradar.com/editorial-policy) Updated 6 November 2026 7 min read

Connect an assistant through Toolradar's company connection page after confirming the active company and its verification. Use the sign-in flow when the client supports it, or a company key for a compatible client that needs one. Review which listings the connection can access before asking it to propose a change.

This guide was first published and last updated on 6 November 2026. The account interfaces and implementation were inspected the same day.

Toolradar is a Dupple software directory that sells vendor services and sponsored placements. Dupple also sells newsletter sponsorships. Our [editorial policy](https://toolradar.com/editorial-policy) and [commercial disclosure](https://toolradar.com/how-we-make-money) explain that relationship. Connecting a company is an account-access step, not a purchase of a ranking, review or AI recommendation.

## Start with the company you intend to authorize

Sign in to the account that belongs to the relevant company and check which company is active. The connection page requires an active verified company. If verification or product association is incomplete, resolve that first using the [company-claim guide](https://toolradar.com/vendors/guides/claim-company-page). A product that is not in the catalog follows the separate [submission process](https://toolradar.com/vendors/guides/list-your-software).

The company matters because the owner tools operate on its associated listings. An employee who belongs to several companies should inspect the selected company before authorizing an assistant. A successful connection to one company does not establish access to another company's products. Toolradar rechecks membership and company verification when the owner tools are called.

The connection page can display up to 50 published products associated with the active company. That display is not an exhaustive audit of every submission, unpublished record or catalog association. If a product is missing, check its public status and company relationship rather than creating another listing immediately. The [vendor page](https://toolradar.com/vendors) describes the company tools, and [contact](https://toolradar.com/contact) is the route for an association problem.

## Choose sign-in or a company key

For a client that supports the sign-in connection, start from the current dashboard instructions and authorize the intended account and company. The current server address shown by the company page is https://toolradar.com/mcp. Opening that address in a browser redirects to the [agent information page](https://toolradar.com/for-agents); it is an MCP service address, not the company dashboard. The browser redirect does not test an authenticated assistant connection.

A compatible client that cannot use that sign-in flow may use a company key created in the dashboard. The raw key is displayed once. Keep it in the client's supported credential configuration and retain the prefix or creation date needed to identify it later. Do not assume a general catalog API key grants the company's owner tools; the company association and membership checks matter.

Table: Company connection options, implementation inspected 6 November 2026.

| Route | When it fits | What to review |
| --- | --- | --- |
| Interactive sign-in | The assistant supports Toolradar's authorization flow. | The account and company selected during authorization. |
| Company key | A compatible client needs a key instead of the sign-in flow. | Which person created the key and which company it belongs to. |
| Managed sign-in | An eligible organization has an administrator configuring managed authorization. | Organization settings, company membership and the dedicated setup instructions. |

These are access routes to the same company's tools, not packages with different ranking benefits. Assistant menus, organization policies and supported transports can differ. Follow the instructions available for the actual client rather than assuming that a menu described for another application will be present.

## Know who can create and end access

A signed-in member of a verified company can create a company key through the current key route. The implementation permits up to 5 active company keys per person in that company. The limit is not 5 keys shared by the entire company, and a key for a different company is a different association. Revoke a key that is no longer required before attempting to replace it at the limit.

An ordinary member can revoke their own company key; owners and administrators can revoke keys belonging to other people in that company. The connection list has a similar distinction: a person can disconnect their own assistant connection, while an owner or administrator can disconnect another connection for the company. Seeing a row does not by itself mean that every account can perform every management action on it.

The [MCP authorization specification](https://modelcontextprotocol.io/specification/2025-06-18/basic/authorization), read 6 November 2026, describes authorization for protected HTTP servers. It does not establish company ownership or the correctness of a vendor's product claims. Those are separate checks performed by Toolradar and by the person reviewing a proposed edit.

## Read the recent lists with their limits

Toolradar data: the company connection query shows up to 50 unrevoked assistant connections that were created or last used within a rolling 30-day window. Members see their own matching connections; company owners and administrators can see matching connections across the company. The interface is a recent operational view, not a promise to display every historical authorization.

The same page loads up to 25 recent edit records, ordered newest first. That edit-history query does not use the connection list's 30-day filter. It also loads up to 50 published products, while the active company-key list is a separate query. Do not assume every panel covers the same dates or the same number of records.

The [dated connection-definition file](https://toolradar.com/data/company-connection-definitions-2026-11-06.json) records these query limits and the inspected implementation sources. They explain what may be absent from the current display; they are not counts of customers, connected companies or successful edits. The file contains no account identifiers, credentials or activity records.

If an expected connection is missing, first check the current company, account role and recent-activity window. An empty list does not alone establish that no connection has ever existed. If the visible controls cannot resolve the question, give support the company and the approximate connection date through an appropriate account channel.

## Inspect a read before approving a write

After connecting, ask the assistant to inspect the company's existing listing information before proposing an update. Confirm the product name, slug and associated company in the result. A read can establish what Toolradar currently returns for that listing; it does not independently confirm that every product claim is accurate.

For example, a fictional company called Northstar Notes might have two products. Its employee should identify which one needs a feature correction before requesting an edit. The example is invented. It reports no customer's connection, edit history or business result.

When a change is proposed, review the returned preview before approving it. The [listing-update guide](https://toolradar.com/vendors/guides/how-to-review-a-toolradar-listing-update) explains replacement fields, evidence statuses and conditional undo. The [MCP tools specification](https://modelcontextprotocol.io/specification/2025-06-18/server/tools), read 6 November 2026, recommends visible tool activity and user control over invocations. It does not guarantee that every assistant presents the same confirmation interface.

## End the specific access you no longer need

Use Disconnect for the intended assistant connection or Revoke for the intended company key, then inspect the result. Those controls concern different credentials. Removing a local connector from an assistant and ending the corresponding server-side company access should not be assumed to be the same action.

If a person leaves a company, review membership and the connections or keys concerned. The owner tools recheck membership on use, but that does not make every other account-management task disappear. An administrator should identify the actual company connection being ended rather than infer access from a familiar client name alone.

Some organizations use managed sign-in rather than an individual interactive connection. Its configuration is a separate administrator task covered by the [managed authorization documentation](https://toolradar.com/docs/enterprise-managed-auth). Check the organization and company mapping there. This guide does not establish that every assistant plan or every company is eligible for that route.

## What we could not verify

We inspected the current connection page, company-key and disconnection routes, and owner membership checks. We did not connect a real customer's assistant or test every client, plan or organization policy. The display limits are implementation definitions checked on 6 November 2026, not an independent audit of access history. A connection does not prove that an edit succeeded, that a listing is accurate or that an assistant recommended the product. Use the [vendor analytics guide](https://toolradar.com/vendors/guides/how-to-read-toolradar-vendor-analytics) for the separate limits of activity counters.

## Frequently asked questions

### Does a public Toolradar connection let me edit any product?

No. Owner actions require the relevant company authorization, membership and verification. A company's owner tools operate on its associated listings, not on every product in the public catalog.

### Do I always need to copy a company key?

No. Use the sign-in flow when the client supports it. A company key is an alternative for a compatible client that requires one; follow the current company dashboard instructions.

### Does the connection page show every authorization ever created?

No. Its connection query displays up to 50 unrevoked records created or last used within 30 days, with visibility depending on the person's role. Recent edit history is a separate query capped at 25 records.

### Can a team member revoke another person's key?

An ordinary member can revoke their own key. The current route allows company owners and administrators to revoke other people's keys within that company.

### Does connecting my company improve its ranking?

A connection grants account access for supported tools. It is not evidence of a ranking benefit, purchased recommendation or buyer outcome. Listing corrections, advertising and analytics have separate purposes.

Spotted an outdated price or a wrong fact? [Suggest a correction](https://toolradar.com/corrections?url=https%3A%2F%2Ftoolradar.com%2Fvendors%2Fguides%2Fconnect-company-to-toolradar): we check it against the vendor's own page. Work for one of these vendors? [Claim your listing](https://toolradar.com/claim) to update it yourself.

## Data and method

- [Company connection definitions, checked 6 November 2026 (JSON)](https://toolradar.com/data/company-connection-definitions-2026-11-06.json)

## Related

- [Where to Submit an AI Tool or Software Product](https://toolradar.com/vendors/guides/where-to-submit-ai-tools-and-software)Nine places to submit an AI tool or software product, what each venue's own page says about getting listed…
- [Where to Advertise a Software Product to Get Its First Users](https://toolradar.com/vendors/guides/where-to-advertise-a-software-product-for-first-users)Six channels compared for a software or AI product, plus fourteen tech newsletters that sell sponsorships,…
- [G2 Alternatives for Software Vendors](https://toolradar.com/vendors/guides/g2-alternatives-for-software-vendors)Eight G2 alternatives for review evidence and profiles, with the route in from each provider's own page, who…
- [Capterra Alternatives for Software Vendors](https://toolradar.com/vendors/guides/capterra-alternatives-for-software-vendors)Eight directories and launch venues to use instead of Capterra, each with the route in from its own page, who…
- [Product Hunt Alternatives for Software Launches](https://toolradar.com/vendors/guides/product-hunt-alternatives-for-launches)Eight launch venues besides Product Hunt, how each takes a post, the vote rules four publish, a 30-day plan…
- [How to Claim a Company Page on Toolradar](https://toolradar.com/vendors/guides/claim-company-page)Step-by-step guide to claiming a company page on Toolradar: sign in, verify by domain or work email, what…
- [How to List Your Software on Toolradar](https://toolradar.com/vendors/guides/list-your-software)How to list software on Toolradar: verify the company, paste the website, check each field, submit. Listing…
- [How Toolradar Checks Software Pricing](https://toolradar.com/vendors/guides/how-pricing-is-checked)Understand Toolradar pricing check dates, vendor-stated values and how to report a change. Data and sources…
- [How to Respond to Reviews on Toolradar](https://toolradar.com/vendors/guides/respond-to-reviews)Learn how verified vendors can respond to Toolradar reviews, handle corrections and protect private…
- [How AI Tools Can Read a Toolradar Listing](https://toolradar.com/vendors/guides/how-ai-assistants-read-listings)Understand Toolradar listing pages, Markdown, crawler access and the limits of AI citations. Sources checked…
- [How Toolradar Badges Work for Vendors](https://toolradar.com/vendors/guides/how-toolradar-badges-work)Understand Toolradar badges, verification and ranking limits. No link exchange since November 2026.
- [How to Use Toolradar Data for a Software Category](https://toolradar.com/vendors/guides/how-to-use-toolradar-data-for-a-category)Learn how to read category data, eligible groups, pricing, traffic and snapshots on Toolradar. Sources…
- [How to Make Your Software Easier for AI Tools to Evaluate](https://toolradar.com/vendors/guides/how-to-make-software-easier-for-ai-tools-to-evaluate)Prepare a clear, verifiable software listing for AI-assisted research without assuming a tool can guarantee…
- [How Toolradar Comparison Pages Work for Vendors](https://toolradar.com/vendors/guides/how-toolradar-comparison-pages-work)Understand Toolradar comparison pages, how to check product facts and how to report a supported correction.
- [How to Read Toolradar Vendor Analytics](https://toolradar.com/vendors/guides/how-to-read-toolradar-vendor-analytics)Read Toolradar vendor dashboard views, clicks and agent requests, with definitions checked 6 November 2026…
- [How to Review a Toolradar Listing Update](https://toolradar.com/vendors/guides/how-to-review-a-toolradar-listing-update)Review a Toolradar owner edit before confirming: feature replacement, evidence status and undo limits,…
- [How to Invite Customer Reviews on Toolradar](https://toolradar.com/vendors/guides/invite-customer-reviews)Invite genuine customer reviews on Toolradar, understand submission stages and read the form limits, checked…
- [How to Manage Your Toolradar Company Team](https://toolradar.com/vendors/guides/manage-company-team)Manage Toolradar company members, roles and invitations, with seven-day expiry and access rules checked 6…
- [How to Read Toolradar Demo Requests](https://toolradar.com/vendors/guides/read-demo-requests)Read Toolradar demo-request statuses, test filters, notification limits and CSV scope for pilot companies,…
- [How to Answer Toolradar Competitor Requests](https://toolradar.com/vendors/guides/answer-competitor-requests)Answer Toolradar competitor requests and write a vendor note, with eligibility, text limits and publication…
- [How to Read Toolradar Media Mentions](https://toolradar.com/vendors/guides/read-media-mentions)Read Toolradar media-mention counts, rolling windows, duplicate stories and public-page limits, with…
- [Advertising formats](https://toolradar.com/advertise/formats)Sponsored boxes, ranked placements and vendor posts, with what each one is and is not.

Some offers on this page may be paid placements or contain affiliate links.

---

Source: https://toolradar.com/vendors/guides/connect-company-to-toolradar
